Hack Night 4/10/13

Posted April 6, 2013
Category 3D Printing
Hack Night is this week!

Hack Night is a bi-weekly event where like-minded geeks hang out and work on projects at the space such as Arduino microcontrollers, computers, 3D printers, and small robots.

Not a member? Not a problem! This is the perfect time to come check out Open Lab Idaho if you haven't had a chance to yet. Hack Night will start at 6 PM on Wednesday, April 10, and usually ends around 9 PM.

This event will be located at Open Lab Idaho at 110 W 33rd Street, Garden City, ID next door to The Reuseum. Look for a white cog and beaker logo on the door!

Hack Night 3/27/13

Posted March 24, 2013
Category 3D Printing
Hack Night is this week!

Hack Night is a bi-weekly event where like-minded geeks hang out and work on projects at the space such as Arduino microcontrollers, computers, 3D printers, and small robots.

Not a member? Not a problem! This is the perfect time to come check out Open Lab Idaho if you haven't had a chance to yet. Hack Night will start at 6 PM on Wednesday, March 27, and usually ends around 9 PM.

This event will be located at Open Lab Idaho at 110 W 33rd Street, Garden City, ID next door to The Reuseum. Look for a white cog and beaker logo on the door.

Hack Night 3/13/13

Posted March 11, 2013
Category 3D Printing
Attack of the threes! Hack Night is a bi-weekly event where like-minded geeks hang out and work on projects at the space such as Arduino microcontrollers, computers, 3D printers, and small robots.

Not a member? Not a problem! This is the perfect time to come check out Open Lab Idaho if you haven't had a chance to yet. Hack Night will start at 6 PM on Wednesday, March 13, and usually ends around 9 PM.

This event will be located at Open Lab Idaho at 110 W 33rd Street, Garden City, ID next door to The Reuseum. Look for a white cog and beaker logo on the door.

Hack Night 2/27/13

Posted February 23, 2013
Category 3D Printing
This Wednesday is Hack Night!

Hack Night is a bi-weekly event where like-minded geeks hang out and work on projects at the space such as Arduino microcontrollers, computers, 3D printers, and small robots. It's a great time to learn and share ideas!

Not a member? Not a problem! This is the perfect time to come check out Open Lab Idaho if you haven't had a chance to yet. Hack Night will start at 6 PM on Wednesday, February 27, and usually ends around 9 PM.

This event will be located at Open Lab Idaho at 110 W 33rd Street, Garden City, ID next door to The Reuseum. Look for a white cog and beaker logo on the door.

Hack Night 2/13/13

Posted February 7, 2013
Category 3D Printing
Don't forget, this week is Hack Night! Hack Night is a bi-weekly event where like-minded geeks hang out and work on projects at the space such as Arduino microcontrollers, computers, 3D printers, and small robots.

Not a member? Not a problem! This is the perfect time to come check out Open Lab Idaho if you haven't had a chance to yet. Hack Night will start at 6 PM on Wednesday, February 13, and usually ends around 9 PM.

This event will be located at Open Lab Idaho at 110 W 33rd Street, Garden City, ID next door to The Reuseum. Look for a white cog and beaker logo on the door.

Hack Night 1/30/13

Posted January 15, 2013
Category 3D Printing
Get this one on your calendar ahead of time: another Hack Night is fast approaching! The next Hack Night will be on Wednesday, January 30th from 6 PM until about 9 PM.

Hack Night is a bi-weekly event where like-minded geeks hang out and work on projects at the space such as Arduino microcontrollers, computers, 3D printers, and small robots. Not a member? Not a problem! This is the perfect time to come check out Open Lab Idaho if you haven't had a chance to yet.

This event will be located at Open Lab Idaho at 110 W 33rd Street, Garden City, ID next door to The Reuseum. Look for a white cog and beaker logo on the door.

Hack Night 1/15/13

Posted January 11, 2013
Category 3D Printing
We are switching things up a little bit, this week Hack Night will be on Tuesday instead of the usual Wednesday. We are going to alternate between Tuesdays and Wednesdays every time to make sure that everyone gets the opportunity to attend. So remember, this week is Tuesday, January 15th at 6 PM.

Hack Night is a bi-weekly event where like-minded geeks hang out and work on projects at the space such as Arduino microcontrollers, computers, 3D printers, and small robots. Not a member? Not a problem! This is the perfect time to come check out Open Lab Idaho if you haven't had a chance to yet.

This event will be located at Open Lab Idaho at 110 W 33rd Street, Garden City, ID next door to The Reuseum. Look for a white cog and beaker logo on the door.

Edit: Last Hack Night, we tried switching it to a Tuesday to clear scheduling conflicts for potential attendees, but we just didn't give you enough notice! Sorry about that! For now, we'll stick with Wednesdays, and if we ever decide to change it again, we'll give you at least two weeks notice. Thanks!

 

Hack Night 1/2/13

Posted December 30, 2012
Category 3D Printing
It's time for the first Hack Night of the year! Hack Night is a bi-weekly event where like-minded geeks hang out and work on projects at the space such as Arduino microcontrollers, computers, 3D printers, and small robots.

Not a member? Not a problem! This is the perfect time to come check out Open Lab Idaho if you haven't had a chance to yet. Hack Night will start at 6 PM on Wednesday, January 2, and usually ends around 9 PM (on the same night, unfortunately).

This event will be located at Open Lab Idaho at 110 W 33rd Street, Garden City, ID next door to The Reuseum. Look for a white cog and beaker logo on the door.

 

 

Hack Night 12/19/12

Posted December 12, 2012
Category 3D Printing
Hack Night is this week! Hack Night is a bi-weekly event where like-minded geeks hang out and work on projects at the space.  Hack Nights tend to feature 3D printers, Arduino projects, quadrocopers, computer projects, motorcycle engines... we see all kinds of things roll, fly, hover, or walk into hack night.

Not a member? Not a problem! This is the perfect time to come check out Open Lab Idaho if you haven't had a chance to yet.

This event will be located at Open Lab Idaho at 110 W 33rd Street, Garden City, ID next door to The Reuseum. Look for a white cog and beaker logo on the door.

Indie Gaming 12/15/12

Posted December 12, 2012
Category 3D Printing
Reuseum Educational is hosting an indie gaming meetup called, "The Art & Science of Indie Gaming." An event for all ages, this meetup will feature indie board games like SEEj, and indie videogames such as Minecraft and other cool specimens of the sport.  We'll also get a chance to see Interplanetary Exploration, a Mars exploring tabletop game that the Raising Makers group is in the process of inventing. If you have an board or tabletop game that you have invented, bring it! For all of the details, be sure to check out  the Reuseum Ed blog!

This event will take place at Open Lab Idaho, next to the Reuseum at 110 W 33rd Street, Garden City, ID on Saturday, December 15th from 10 AM to 6 PM. See you there!